Ives Offset Top Pivot 7226/26F Bedienungsanleitung PDF herunterladen

7226/26F

3/4” Offset Bottom Pivot

Improper pivot set installation can lead to personal injury or property damage. Follow

all instructions carefully. For questions contact Technical Support at 1-888-371-7331.

CAUTION

1. Prepare and mortise bottom of door and floor to receive pivot set. Determine pivot location

using dimensions on reverse side. Be sure to properly locate and mark pivot center

point of the base plate. The bottom pivot set is non-handed. The pivot shaft will thread into

either side of door leaf. To determine hand of door, see diagrams above.

2. Prepare bottom of door: Locate, drill, and tap 1/4-20 mounting holes for metal door. Locate and

drill pilot holes for #14 wood screws for wood door. Mount door leaf in bottom of door with 1/4-20

x 3/4” FHMS or #14 FHWS screws provided. Drill 7/16” dia. x 3/4” deep holes for base plate

mounting. Insert and secure anchor pins, then mount base plate to floor with screws provided.

3. At this point, hang door. Refer to instruction sheet packed with top pivot for details.

4. If height adjustment is necessary for proper door clearance, adjust bottom pivot as follows:

A. Loosen set screw using 3/32” Allen wrench provided (see diagram above).

B. Use 5/16” Allen wrench to adjust pivot shaft height as needed (Figure 1).

C. Tighten set screw firmly.

5. Fasten pivot cap as shown. Secure with cap screw.

Figure 1

Right hand

installation

Left hand

installation

Right hand

installation shown;

left hand opposite

Base plate

Pivot shaft

3/32” set

screw

Door leaf

Pivot cap

Cap screw

Installation Instructions

1 2

Installation Instructions 1
26360-00 2

Inhaltsverzeichnis

Seite 1 - Installation Instructions

7226/26F 3/4” Offset Bottom PivotImproper pivot set installation can lead to personal injury or property damage. Followall instructions carefully. For

Seite 2 - 26360-00

26360 Rev. 4It is very important for installer to verify that center line of top pivot point lines upwith center line of bottom pivot point before fin

Kommentare zu diesen Handbüchern

Keine Kommentare

Ives Offset Top Pivot 7226/26F Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Möbel Ives Offset Top Pivot 7226/26F herunter. Ives Offset Top Pivot 7226/26F User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Möbel Ives Offset Top Pivot 7226/26F